Home Previous Next

CSC240 :: Lecture Note :: Week 03
Assignments | Handouts | Resources | Email Thurman {Twitter::@compufoo Facebook::CSzero}
{GDT::Bits:: Time  |  Weather  |  Populations  |  Special Dates}



Code: funcs0.cpp | funcs1.cpp | scope.c | funcs2.cpp | funcs3.cpp | refparams.cpp | funcs4.cpp
extremelyodd.cpp | itofi.cpp | ArrayEG.cpp | Fibonacci.cpp | BingoCard.cpp | bingo.cpp
LotteryTickets.cpp | pointer0.cpp | pointer1.cpp | cmdline.cpp | temps.cpp

Logical Operators

Logical operators are used to "connect" expressions. Where relational operators are used to compare two values, logical operators take boolean operands and combine them to form boolean values.

  !   !expr NOT
  &&   expr1 && expr2 AND
  ||   expr1 || expr2 OR

The ! operator is a high-precedence unary operator, while && and || are medium-precedence binary operators. AND has slightly higher precedence than OR.


   int i = 10, j = 5, k = 0;

   i == 10 && j == 5     yields the value 1 (true)
   i == 5  && j == 5     yields the value 0 (false)
   i == 10 || j == 5     yields the value 1
   i == 5  || j == 10    yields the value 0
   !i                    yields the value 0
   !k                    yields the value 1
   !k && k               yields the value 0

Given expr1 && expr2, expr1 is evaluated first. If it evaluates to false, then the entire EXPR will be false (0 && anything is 0); therefore, expr2 is not evaluated. This is called short circuit evaluation.

When using the terms true and false, zero is false and not-zero is true.

GDT::C++::Code:: LogicalOps.cpp

{TopOfPage} {Resources}

A Joke Having To Do With Loops

Example of 21st century Informatics?

   Q: How do you keep a computer programmer in the 
      shower all day long?

   A: Give them a shampoo with a label that says 
      "rinse, lather, repeat." 

Berkeley.edu::Jester--The Online Joke Recommender is a "computer program that rates jokes and gives suggestions based on each user's personal sense of humor."

{TopOfPage} {Resources}

The while Statement

The while statement supports iteration (i.e. it is a repetition control statement). Iteration is the process of repeating an operation.

The idea of looping in a computer program can be attributed to Ada Lovelace (01815-01852). Many believe Lovelace wrote the first "computer program." On 10 December 1980 (Ada's birthday), the U.S. Defense Department approved the reference manual for its new computer programming language, called "Ada".

The while statement repeatedly executes a simple statement or block (i.e. compound statement) until a conditional EXPR becomes false (i.e. 0). Each loop iteration is called a cycle.

   while (EXPR)    // typically, you don't want a semicolon 

   EXPR is the "conditional" test used to determine whether the loop 
   should continue for another cycle, and  statement  is to be repeated.
   If multiple  statements  need to be executed, then use a compound 
   statement (or block).

   EXPR is evaluated only at the beginning of a loop cycle.

   Pseudo-code for a while loop:
         evaluate the EXPR
         if  EXPR  is "true"      // i.e. a non-zero value
            execute statement
            go to top-of-loop
            go to end-of-loop  (i.e. terminate the loop)

   //Example:  loop until user enters a positive number
   int n = -1;
   while (n <= 0)
      cin >> n;

   //Example:  print out the numbers 1 through 5
   int i = 1;
   while (i <= 5) {
      cout << i << endl;
      i = i + 1;
Sentinel Values

One way to terminate (end) a loop is when a particular data value is entered (e.g. the user enters a -1 or end-of-file is encountered), a special value that is used to end the loop is called a sentinel value.

Sentinel values should be defined as manifest (symbolic) constants. Example:

   const int EXIT_VALUE = -1;
   int n = EXIT_VALUE + 1;
   while (n != EXIT_VALUE) {
      cout << "Enter a number (" << EXIT_VALUE << " to exit): ";
      cin >> n;
Infinite Loops

When you use a loop in a program, it is important to make sure that the condition used to control the loop will eventually become false, so that the loop can end. A loop that never finishes is called an infinite loop.

To stop an infinite loop, a special command sequence must be typed on the keyboard to interrupt the program and forcibly cause it to quit. This command differs from machine to machine.

Sometimes infinite loops are used by design; therefore, existenance of an infinite loop does not necessarily imply a program defect.

   // the following are infinite loops that do nothing 
   while (1) 
      ;  //null statement

   int i = 99;
   while (i != 0) ;

   while (true) ;  //C++ only...

   while (!false) { }  //C++ only....

   while (43 == 43) ;

{TopOfPage} {Resources}

The do while Statement

The do while statement supports iteration (i.e. it is a repetition control statement). Iteration is the process of repeating an operation.

The do while statement repeatedly executes a simple statement or block (i.e. compound statement) until a conditional EXPR becomes false (i.e. 0). Each loop iteration is called a cycle.

   while (EXPR);  //semicolon must follow the while statement

   EXPR is the "conditional" test used to determine whether the loop 
   should continue for another cycle, and  statement  is to be repeated.
   If multiple  statements  need to be executed, then use a compound 
   statement (or block).  A compound statement is almost always used.

   EXPR is evaluated only at the end of a loop cycle.  

   Pseudo-code for a do-while loop:
         execute statement
         evaluate the EXPR
         if  EXPR  is "true"      // i.e. a non-zero value
            go to top-of-loop
            go to end-of-loop  (i.e. terminate the loop)

   //Example:  print out the numbers 1 through 3
   int i = 1;
   do {
      cout << i << endl;
      i = i + 1;
   } while (i <= 3);

   Could the previous loop be rewritten:
      int i = 1;
      do cout << i++ << endl; while (i <= 3);

   How about:
      int i = 1;
      do cout << i << endl; while(i++ <= 3);

When you know for sure that a loop must cycle at least once, then a do-while is a good loop construct to use.

   set item counter to 0
   do {
      prompt user for data
      get data from user
      if (data equals sentinel value)
      if (data is junk)
         continue;  //get more data from the user
      process the data
      increment the item counter
   } while (1);
   print the item counter
Comment on Style

The do-while can be difficult to read; therefore, to help it "stick" out, I suggest the following.

{TopOfPage} {Resources}

The for Statement

The for statement supports iteration (i.e. it is a repetition control statement). Iteration is the process of repeating an operation.

The for statement repeatedly executes a simple statement or block (i.e. compound statement) until a control-EXPR becomes false (i.e. 0). Each loop iteration is called a cycle.

   for ([initialization-step]; [conditional-step]; [increment-step])

   The optional "initialization-step" is executed once before the loop 
   is ever executed (and before the "conditional-step" is evaluated
   for the first time).

   The optional "conditional-step" is an EXPR that is evaluated at
   the top of the loop.  If it is true, then the body of the
   for  statement is executed; otherwise, flow control jumps to
   the first executable statement after the  for  loop body.  If
   no conditional-step is specified, then  it is taken as
   permanently true.

   After the body of a  for  loop has been executed, the optional
   "increment-step" is executed.

   After the increment-step is executed; the conditional-step
   is re-evaluated.


      //print the numbers 1 through 3

      int i;
      for (i = 1; i <= 3; i = i + 1)
         cout << i << endl;

If the body of the for contains multiple statements, then a compound statement is needed.

All three steps for a for loop are EXPRs. Most commonly, the initialization-step and the increment-step are assignments or functions calls, and the conditional-step is a relational EXPR.

The for is frequently used when there are simple initialization and increment steps because it keeps the loop control statements close together and visible at the top of the loop.

The initialization and increment steps often take advantage of the sequence operator.

   for (i = 0, j = 99; i < n; i = i + 1, j = j - 1)

{TopOfPage} {Resources}

Introduction to Functions

Lowest level ideas become EXPRs, EXPRs are grouped into statements, and statements are grouped together into blocks and functions.

A function is a set of statements that have been collected together and given a name.

Functions break large computing tasks into smaller ones, and enable people to build on what others have done instead of starting over from scratch. Functions support reuse.

Functions hide details of operation from parts of the program that don't need to know about them. Functions support information hiding.

Functions usually consist of zero or more statements, and a collection of local data. Functions support encapsulation.

Programs generally consist of many small functions rather than a few big ones. Functions support modularity.

Repetitive statements should be grouped into a function. Functions eliminate duplicate code.

Additional benefits derived from using functions.

Functions that perform generic tasks can be added to a library. Library functions can be used in multiple programs. The C and C++ languages come with extensive libraries that contain numerous functions.

{TopOfPage} {Resources}

Function Terminology

The act of executing a set of statements associated with a function is known as calling the function. If function A calls function B, then function A is referred to as the calling or caller function and function B is the called function.

Arguments are a list of EXPRs that are evaluated and whose values are passed to the function. (Note: C and C++ are " pass-by-value" languages.) A function does not need to take arguments. If function A calls function B, then arguments allows function A to communicate information to function B.

Arguments, if any, that are passed to a function B, are parameters within function B. Parameters are treated as initialized local (i.e. auto variables).

When a function is done, it returns to the caller by executing a return statement.

Functions can "return a value" back to the caller; thus, if function A calls function B, then the return value allows function B to communicate with function A.

Before a function can be called, it must be declared. A function declaration that also includes the type(s) of the parameters is called a prototype.

{TopOfPage} {Resources}

Function Prototypes

A function must be declared (i.e. prototyped) before it is used.


   return-type function-name(parameter types, if any);


   int maxValue(int, int);
      //returns an int; receives two int values as parameters

   float getSalary(void);
      //returns a float; doesn't take any parameters

   double computeFactorial(int number);
      //returns a double; receives an int value
      //parameter types can have a tag specified with them, but the
      //    tag is ignored by the compiler; tags are used for
      //    documentation purposes only and can help the readability of 
      //    a program; they have what is referred to as function 
      //    prototype scope

   char getGrade(short, unsigned char, unsigned char);
      //returns a character; receives a short value and two 
      //    unsigned characters as parameters

   void abort(void);
      //returns nothing; receives nothing

Function prototypes are used by the compiler to help make sure that functions are called correctly (e.g. correct number of arguments). They were added to C++ to improve type-checking and were incorporated into C by the standards committee.

Function prototypes can help ensure that functions are called using:

When prototyping function arguments, only the types of the arguments need to be specified. If they are given names, then those names have "function prototype visibility" and are ignored by the compiler. Names used in function prototypes are for documentation purposes only.

f() Versus f(void)

In C, f() implies a function that takes any number of arguments; where in C++ it indicates a function that takes no arguments.

In C++, f() and f(void) are equivalent.

{TopOfPage} {Resources}

Function Definitions

The function definition contains the statements that comprise a function. The definition of a function is also referred to as its implementation.

Function statements are enclosed in {}'s and are referred to as the function body.

The body of a function consists of zero more variable declarations/definitions and zero or more statements.


   int x(int n1, int n2) {
      //this is the function body...

   void y(float f, char c, int i) {
      //this function doesn't return a value; it takes three
      //   parameters (a float, a char and an int)
      if (i) return;
When a function is defined, each parameter, if any, must be specified with a type and a name. Parameter type-name pairs are separated by comma's (these comma's are not the sequence operator).

If the return-type is not specified, then it defaults to int. You should get in the habit of always explicitly specifiying the return-type.

Parameters can be thought of as initialized local variables (i.e. space is allocated for them from the stack and they are initialized to the value of the arguments that are passed).

Variables declared inside of a function body are visible only with that block of code. These variables are referred to as a "local" variables.

A function definition can contain multiple return statements; however, many programmers are of the opinion that a function should have only one exit point.

A stub function is a function that contains no statements.

{TopOfPage} {Resources}

Function Comment Blocks

Every function should begin with a function comment block. The function comment block contains - at a minimum - the name of the function, a list of arguments that it receives, a description of its return value (if any), and a brief description of what the function does. In addition, any side-effects (or outputs) performed by the function should be documented.

The following is an example function comment block.

    * name:  stringCompare
    * parameters:  char* -- pointer to a string
    *              char* -- pointer to a string
    * returns:  1 if strings are equal; 0 otherwise
    * description:  compares two strings character by character
    *               to determine if they are equal

Cay Horstmann says...

"The description of a function comment block does not document the implementation but the idea."

{TopOfPage} {Resources}

Calling a Function

A function is called by specifying the function's name, followed by a left paren, a comma separated list of arguments (if any) and a right paren. Comma when used in this context is not the sequence operator.


   int rv = x(200, 210);
      //call the function  x  passing it two values: 200 and 210
      //capture the return value from  x  in the variable rv

      //call the function  abort  
      //no arguments are passed, nor does the function return any value

A function call is a sequence point: every EXPR that comprises an argument is evaluated prior to the function being called. The order in which the arguments are evaluated is undefined.

C and C++ are "call-by-value" languages: the arguments are evaluated and their respective values are passed to the function.

{TopOfPage} {Resources}

Function Return Value

A function communicates back to the caller by "returning" a value.

The type of value returned by a function (i.e. the return-type) is specified when the function is defined. If the return-type is not specified, then it defaults to int.

A function does not have to return a value. In these cases, the return-type void is used.

Other points.

The syntax of the return statement is as follows.

   return;       //used when the return-type of the function is void

   return EXPR;
      EXPR is evaluated.  The result of the evaluation, if needed,
      is converted to the return-type of the function.  For example,
      if the return-type of the function is  int  , then

         return 3.14;  

      will cause the 3.14 double to be converted to an int; therefore,
      the calling function will be returned the value 3.

   Optionally, the return EXPR can be enclosed in parens.

      return (EXPR);  
      return (3.14);           or   return 3.14;
      return (EXIT_SUCCESS);   or   return EXIT_SUCCESS;
      return (i + 3 * j);      or   return i + 3 * j;
      return (i > 4);          or   return i > 4;

If a function returns a value, then it is the caller's responsibility to examine the return value.

If a function's return-type is void, then return statements, if any, cannot have any expressions.

If a function is called that returns a value and the return value is ignored by the caller, then the caller should type-cast the function call to be (void).

   (void) printf("hello, world\n");

{TopOfPage} {Resources}

Lifetime and Visibility (scope)

Lifetime is the period, during execution of a program, in which a variable or function exists (all functions in a program exist at all times during its execution).

Visibility is the portions of the program in which a variable or function can be referenced by name (also referred to as scope (scope units: file, function, block or function prototype).

Local and Global Variables

Local variables are declared and/or defined within a block (either a function or a compound statement).

Global variables are declared and/or defined outside of any function.

Storage Classes

The auto storage class indicates that a variable is a local variable and that memory is automatically allocated/de-allocated. By default, local variables are defined to be auto; therefore, this storage class is rarely specified.

Using auto on a global variable is illegal.

Automatic variables are not initialized to any known value.


The extern storage class allows a global variable to be visible across multiple source files.

A global variable defined in file A can be accessed in file B if and only if file B contains the following declaration.

	extern type variable_name;

	extern int errno;  /* errno is defined in some other file */

Use of extern results in a declaration -- not a definition. In other words, an extern declaration does not result in the allocation of memory.

It is not legal to initialize an external variable at the time it is declared (i.e. extern float rate = 5.3; is illegal).


When static is applied to a global variable, then it limits the scope of an object to the rest of the file (i.e. it cannot be externally declared in other source files).

When static is applied to a local variable, then it causes the local variable to remain in existence across function calls providing private, permanent storage within a single function.

When static is applied to a function, then the function is visible only to the source file in which is defined (in a way, the function is made "private").


A register is a high speed memory location located on the CPU.

The register storage class is used on local variables that are going to be accessed many times (for example, loop control variables).

{TopOfPage} {Resources}

Reference Parameters

C++ passes arguments to functions "by value." This calling mechanism prohibits called functions from modifying the variables defined in the caller functions.

Reference parameters  allows arguments to be passed "by reference" instead of by value. If you pass an argument to a function by reference, then the called function can access that variable.

Passing an argument by reference causes the address of the variable argument to be passed rather than its value; consequently, the called function receives a "pointer" to the variable. Although the called function is dealing with a pointer, pointer notation is not required.

A parameter that is received as a reference becomes an alias for the variable that was passed.

Reference parameters are often used when passing large arguments to a function (e.g. a structure). It is more efficient to by reference than it is to pass by value (less data must be copied).

Suppose we have a function that converts inches to feet and inches. We have a problem: our function needs to return two pieces of information, but is allowed to return only one value. One solution to the problem is to use reference parameters:

   int convertInches(int totalInches, int& feet);
      // the & after the type  int  indicates that the function
      // receives a reference to an  int

   int feet;
   int inches = convertInches(80, feet);  
      // feet is passed by reference; no special notation is needed


      The function receives the total inches.  The return value
      of the function is the inches, and the feet are copied
      into the reference parameter supplied as the 2nd argument.

   int convertInches(int totalInches, int& feet) {
      const int INCHES_PER_FOOT = 12;
      feet = totalInches / INCHES_PER_FOOT;
      return totalInches % INCHES_PER_FOOT;

{TopOfPage} {Resources}

Default Function Arguments

Default function arguments can be specified in either the function definition or prototype (but not both). Convention is to specify them in the function prototype.

Only the rightmost arguments can be defaulted. Once a default function argument is used, all remaining arguments must be default arguments.

Default arguments are useful when a function needs more arguments than are necessary to handle simple cases; in particular, functions that construct objects often provide several options for flexibility.

   Syntax:  data-type function_name(Type param = value);

   If  param  is not passed by the caller, then it will be set
       to  value  .


      void printReport(char filename[], bool condensed = false);
      // one argument is required:  a filename, but the second is a
      //     default argument and it defaults to  false  if not passed

      printReport("report.out");           //1
      printReport("report.out", true);     //2
      printReport("report.out", false);    //3
          //statements 1 and 3 are equivalent

{TopOfPage} {Resources}

Function Overloading

Function overloading is the ability to give different functions the same name.

Stroustrup says:

Most often, it is a good idea to give different functions different names, but when some functions conceptually perform the same task on objects of different types, it can be more convenient to give them the same name.
Use descriptive overloaded function names to describe similar operations, not different behaviors.
      int max(int, int);        //find max of two ints
      float max(float, float);  //find max of two floats

   Not so Good:
      void draw(Image*);        //draw an image
      void draw(Card*);         //draw a card 
The following is an example of an overloaded function:
   void print(int), print(double), print(long), print(char), 
        print(int, int), print(double, double);

   char c;
   short s;
   int i;
   float f;

   print(c);            // invoke print(char)
   print(i);            // invoke print(int)
   print(s);            // invoke print(int); s promoted to int
   print(f);            // invoke print(double); f promoted to double
   print('A');          // invoke print(char); 'A' is a char
   print(200);          // invoke print(int); 200 is an int
   print(200L);         // invoke print(long); 200L is a long
   print(99.9);         // invoke print(double); 99.9 is a double
   print(i, i);         // invoke print(int,int)
   print(i, 'a');       // invoke print(int,int); 'a' promoted to int
   print(s, 'A');       // invoke print(int,int); s - 'A' promoted to int
   //! print(1.1L);     // ambiguous -- compiler can't decide
   print(200L, i);      // invoke print(int,int);
   //! print(i, 3.14);  // ambiguous -- compiler can't decide
When  print()  is called, the compiler must figure out which of the functions with the name "print" is to be invoked. This is done by comparing the types of the actual arguments with the types of the parameters of all functions called "print". The function with the best match is called; if none exist, then a compile-time error.


The  signature  of a function is defined to consist of the name of a function and its ordered set of parameter data types.

Criteria used to determine a match (partial):
  1. exact match of function call arguments with an overloaded function signature
  2. trivial conversions (exact match after applying promotions to argument data types -- char ==> int, short ==> int, float ==> double)
  3. exact match after applying promotions and standard conversions to argument data types (float ==> int, double ==> float)
  4. exact match after programmer defined conversions (e.g. typecast)
Note:  const  arguments can be distinguished from non-const arguments.
	void foo(const char*);
	void foo(char*);

	These two functions have different signatures.
Return types are not considered in overload resolution.

Functions declared in different scopes do not overload.

If not careful, you can be surprised as to which function is called. It is poor programming practice to redefine library functions (your code may end up calling the correct function, but existing code in the library may end up invoking the wrong function).

Internally, the compiler accomplishes function overloading by  mangling  function names. Function name mangling makes each translated function name unique. A function name is mangled by adding prefixes and suffixes to the the name. The prefixes and suffixes are determined in part by the ordered lists of the function's parameter data types.

	print(200);             // mangled name: print_Fi
	print(float(3.14));     // mangled name: print_Ff

Function Overloading
C: no   C++: yes   Java: yes

{TopOfPage} {Resources}


An array is a collection of individual data values with two characteristics: it is ordered and homogeneous.

The following are some terms commonly used when talking about arrays:

An array is homogeneous because each element must be of the same type. For example, an array of int's, an array of float's, an array of char's.

An array is ordered -- it has a 1st element, a 2nd element, a 3rd element, and so on. Array elements are stored in contiguous memory locations.

Just like any other variable, an array must be defined before it is used.

   Syntax:  element-data-type array-name [ length ];

      int intArray[10]; 
         name:  intArray
         type:  int
         length:  10
         size:  10 * sizeof(int)

      char someString[32];
         name:  someString
         type: char
         length: 32
         size:  32 * sizeof(char)

Each element of the array is identified by a numeric value called its index (index numbers always start at 0).

When defining an array, its length must be specified at compile-time. In addition, the specification of the length must be a constant integral EXPR.

   int i = 10;
   /* double salaries[i];   // illegal (not a constant) */
   /* char name[15.5];      // illegal (not an integral type) */
   const int MAX_ELEMENTS = 10;
   short scores[MAX_ELEMENTS];  /* okay in C++, not C */
   #define LENGTH 5
   float someArrayOfFloats[LENGTH];

Typically, array lengths are defined to be manifest constants.

Array Initialization

Arrays can be initialized at the time they are defined.

   int evenNumbers[5] = { 2, 4, 6, 8, 10 };

   note:  it is a syntax error if the # of initializers is
          greater than the array length (i.e. # of elements)

   The elements of the initializer list must be constant
   EXPRs.  If the number of initializers is less than the
   array length, then remaining elements are set to zero.

If an array is initialized when defined, then the length is not needed -- the compiler will set the length depending on the number of initializers. If the length of the array needs to be greater than the number of initializers specified, then the length must be specified.

   float radioStations[] = { 103.1, 93.3, 100.7 };

   radioStations  has a length of 3; to figure out the length
   of the array using code:

      sizeof(radioStations) / sizeof(radioStations[0])

   sizeof(radiostations)  evaluates to the size of the array
   and  sizeof(radioStations[0])  evaluates to the size of a
   single element of the array (recall, an array size is equal 
   to the length of the array times the size of the array type)

   the following EXPR also works to determine the length of
   an array    sizeof(radioStations) / sizeof(float)    but could 
   result in the defect if the type of the array is changed and
   the EXPR is not

There is not a convenient mechanism for initializing all elements of an array to a single value (exception: it is easy to set all elements of an array to zero -- int a[10] = { 0 };).

For efficiency, locally declared arrays that are initialized at definition may be declared to be static.

   static short tvStations[99] = { 3, 10, 12, 61 };

   tvStations  is an array of length 99; elements 0, 1, 2, 3
   have non-zero values, whereas elements 4 through 98 equal 0;
   the array is initialized once -- at program load time

Once an array has been defined, its length (i.e. number of elements) cannot be altered.

Elements of the array are accessed using the unary array operator [].

   const int LEN = 10;
   int a[LEN];

   a[3] = 150;  /* set element #4 to 150 */
   a[1] = 200;  /* assign the value 200 to element #2 */

   if (a[1] == a[3]) /* compare the value of element #2 with element #4*/

Array indicies must be integral values, but they are not restricted to being constants.

   int i, j, k;

   a[0] = 100;
   a[i] = 150;
   a[i * j - k] = 210;
   a[a[a[i]]] = 250;
   a[rand() % LEN] = 178;

The language does not protect against indexing beyond the ends of an array. Typically, if this happens, then a run-time error is encountered.

   a[-1] = 100;
   a[sizeof(a)/sizeof(a[0]) + 2] = 200;

Array 'a' cannot be copied to array 'b' using simple assignment.

   #define LEN 5 
   int a[LEN] = { 100, 200, 210, 120, 240 }, b[LEN];

   /* b = a;   //syntax error -- array name not a lvalue */
   for (int i = 0; i < LEN; i++)
      b[i] = a[i];
Arrays and Functions

Arrays are passed to functions "by reference." (Think about the overhead if arrays were passed by value.)

A function that receives an array as a parameter, obtains a constant pointer to the first element of the array.

Unless specifically qualified to be const, the function can modify the content of the array.

When a function receives an array as a parameter, it does not know, nor can it figure out, the length or size of the array. In many cases, the caller passes the array length (size_t) to the function.

   void func1(int[]);         //do *not* specify the array length
   void func2(const int[]);   //func2() not allowed to modify the array
   void func3(int [], int);
   #define A_LEN 10
   int a[A_LEN];
   func1(a);  //using array name w/o [] operator "decays" into a
              //constant pointer to the 1st element of the array
   func3(a, A_LEN);  //pass the array length to the function
   void func1(int i[]) {  //again, array length not specified
      int len = sizeof(i) / sizeof(i[0]);
         // does not work -- sizeof(i) evaluates to the size
         // allocated for pointer variables, which is typically
         // the sizeof(int)...
   void func2(const int i[]) {
      //! i[0] = 100;    //use of  const  implies the content of the
                         //array cannot be changed...
   void func3(int i[], int len) {
      for (int i = 0; i < len; i++)
         //loop through each element of the array

Pointer notation can be used when prototyping and defining functions that receive arrays as parameters.

   void func1(int*);  //this syntax indicates that the function receives
                      //a pointer to an array
   void func2(const int*);  //array content cannot be modified

A Tutorial on Pointers and Arrays in C

{TopOfPage} {Resources}


A pointer is a variable whose value is an address of another variable.

Defining and Initializing Pointer Variables
When defining a variable, prefixing the variable's name with an asterik * causes the variable to be a pointer.

   int* iptr;   /*define variable iptr that will point to an int variable*/
   float * fptr; /*define variable fptr that will point to a float variable*/
   char *cptr;  /*define variable cptr that will point to a character*/
   int i, j;
   float f;
   char c;

   iptr = &i;  /*assign the address-of variable 'i' to iptr*/
   fptr = &f;  /*assign the address-of variable 'f' to fptr*/
   cptr = &c;  /*assign the address-of variable 'c' to cptr*/
   int* iptr2 = &j; /*define and initialize an int pointer*/
   iptr = iptr2;  /*now iptr points to the variable 'j'*/

   note:  Placement of the  *  when defining a pointer variable is
          a matter of style -- I like to place the  *  next to the
          data type, but others prefer to place it next to the 
          variable name.  Placing it next to the data type does
          require caution when multiple variables are defined on
          the same declaration statement.  Example:

              int* ip1, ip2;  
                   // ip1  is a pointer to an  int  , but  ip2  is a
                      regular  int

              int* ip1, *ip2;  
                   // ip1  and  ip2  are both pointers to an  int

The address-of operator only applies to objects in memory: variables and array elements.

Locally defined non-static pointers, unless explicitly initialized, are garbage and using them without initialization can cause a program to execute incorrectly (or abort).

Global and statically defined pointers are initialized to the NULL pointer.

Accessing Data Using Pointers

The unary operator * is the indirection or dereferencing operator; when applied to a pointer, it accesses the object the pointer points to.

   int i = 200;
   int* iptr = &i;

   cout << *iptr;    /*prints 200 -- the value of 'i' which is the object
                       iptr points to*/
Pointers and Function Arguments

Since C passes arguments to functions by value, there is no way for the called function to alter a variable in the calling function. A way to obtain the desired effect is for the calling program to pass pointers to the values to be changed.

   void swap(int*, int*);

   int i, j;

   swap(&i, &j);

   void swap(int* a, int* b) {
      int tmp = *a;
      *a = *b;
      *b = tmp;

Using pointers is similar to using reference variables; however, reference variables are part of C++ and they are not part of C.

Advantage of using reference variables over pointers.

Introduction to Pointers and Arrays

There is a strong relationship between pointers and arrays.

When an array name is used by itself, it evaluates to a constant pointer to the first element of the array.

Everywhere you use arrayName[index] you can use *(ptr + index) (assuming ptr points to some part of the array).

   int scores[10];

   scores[0] = 2;      // or  *scores = 2
   scores[1] = 3;      // or  *(scores + 1) = 3
   *(scores + 2) = 5;  // or  scores[2] = 5

{TopOfPage} {Resources}

Home Previous Next